Home > News > Content

Product Categories

  • CDX (HK) INTL INDUSTRIAL LIMITED
  • Office Add:Room1606, Blue Penisular Hotel,No.22 Xing Qian Road JiMei District,Xiamen,China 361022
  • Factory Add: No.10 Yuan Xi Road,Xing Lin Village,Ji Mei District,Xiamen,China
  • Tel:+86-592-6073382
  • Fax:+86-592-5221931
  • Email:
    cdx-machiningparts@chengdaxing.com
  • What Is The WEDM-HS ?
    Nov 06, 2018

    The CNC Machining, CNC turning, Auto lathe turning, CNC Milling,Stamping, Sheet metal fabrication, Casting, Injection molding are the common machining process.


    Fast wire walking is a kind of WEDM, also called high speed wire cutting machine (WEDM-HS), which is the main machine in production and use in our country, and it is the unique mode of WEDM in China.


    Fast wire walking is a kind of electrical discharge wire cutting, also called high speed wire walking wire cutting machine (WEDM-HS). Its electrode wire (generally molybdenum wire specification: 0.18mm / 0.2mm / 0.22mm / 0.25mm) is reciprocating at high speed. The speed of molybdenum wire is 8~10m/s adjustable, molybdenum wire can be reused, the processing speed is convenient and named (its precision is 0.05~0.08mm). When molybdenum is in reverse direction, the processing quality is reduced (if the speed is proportional to the quality, if the speed is proportional to the quality), The speed and quality decline (rough surface) and slow quality rise (bright surface) is the main machine for production and use in China. It is a unique WEDM mode in China.



    WEDM is to connect the negative electrode of the pulse power supply through the electrode wire and the positive pole of the pulse power supply to the workpiece. After the high frequency pulse power supply is switched on, when the distance between the workpiece and the electrode wire is less than the discharge distance, The pulse electric energy causes the dielectric (working fluid) to break down, forming a discharge channel. Under the action of the electric field force, a large number of negatively charged electrons rush to the positive electrode at high speed, and the positively charged ions to the negative electrode. The high temperature caused by ionization makes the workpiece surface melt or even vaporize, and the metal is thrown out with the movement of the electrode wire and the impact of the working fluid, thus forming pits on the workpiece surface. In high temperature region, because of polarity effect, the distribution of energy between electrode wire and workpiece is different, so the surface temperature of electrode wire and workpiece is different, and the melting temperature of electrode wire is much higher than the melting temperature of workpiece material. At the same time, the electrode wire leaves the high temperature area at high speed, so the corrosion amount of the electrode in the high temperature region is much smaller than that of the workpiece, which makes the surface of the workpiece form a larger pit, while a very small pit is formed on the surface of the electrode wire. Because the machining process is continuous and the stepping motor is continuously fed to keep the gap between the electrode wire and the workpiece to maintain the discharge, the workpiece is gradually cut out a gap.




    edm wire cut parts